IAEA Fusion Energy Conference 2010

Proceedings of the 23rd IAEA Fusion Energy Conference
Daejeon, 11-16 October 2010

Organized by the International Atomic Energy Agency
and hosted by the Government of the Republic of Korea

IAEA-CN-180

Session ITR/2 & FTP/1 & SEE/1 - ITER, Fusion Technology, Safety, Environmental & Economics Aspects of Fusion


PaperFirst AuthorTitle
ITR/2-1 Sborchia, C.The ITER Magnet Systems: Progress on Construction
ITR/2-2 Babineau, D.Review of the ITER Fuel Cycle
ITR/2-3 Merola, M.Power Handling in ITER: Divertor and Blanket Design and R&D
FTP/1-1Ra Kojima, A.Demonstration of 500 keV Beam Acceleration on JT-60 Negative-ion-based Neutral Beam Injector
ITR/2-4Rb Kashiwagi, M.1 MV Holding and Beam Optics in a Multi-Aperture Multi-Grid Accelerator for ITER NBI
FTP/1-2Ra Litvak, A.G.Development in Russia of Megawatt Power Gyrotrons for Fusion
ITR/2-5Rb Sakamoto, K.Development of High Power Gyrotrons and EC Technologies for ITER
ITR/2-5Rc Gantenbein, G.2.2 MW Operation of the European Coaxial-Cavity Pre-Prototype Gyrotron for ITER
SEE/1-1Ra Goldston, R.J.Fusion Energy and Climate Change
SEE/1-1Rb Muehlich, P.The Potential Role for Fusion Power in Future Energy Markets
SEE/1-1Rc Yamazaki, K.Environmental and Economic Assessments of Magnetic and Inertial Confinement Fusion Reactors