IAEA Fusion Energy Conference 2010

Proceedings of the 23rd IAEA Fusion Energy Conference
Daejeon, 11-16 October 2010

Organized by the International Atomic Energy Agency
and hosted by the Government of the Republic of Korea

IAEA-CN-180

Session FTP/3 - Materials & Fuel Cycle


PaperFirst AuthorTitle
FTP/3-1 Garin, P.IFMIF: Status of the Validation Activities and of the Engineering Design Activities
FTP/3-2Ra Yamanishi, T.Recent Progress in Fusion Technologies under the BA DEMO-R&D in Phase 1 in Japan
FTP/3-2Rb Ochiai, K.Tritium Recovery Experiment from Li Ceramic Breeding Material Irradiated with DT Neutrons
FTP/3-3Ra Rapp, J.Plasma-Facing Materials Research for Fusion Reactors at FOM Rijnhuizen
FTP/3-3Rb Koidan, V.S.Effects of Plasma Interaction with Radiation-Damaged Tungsten
FTP/3-4Ra Chernov, V.M.Heat-Resistant Ferritic-Martensitic Steel RUSFER-EK-181 (Fe-12Cr-2W-V-Ta-B) for Fusion Power Reactor
FTP/3-4Rb Gaganidze, E.Low Cycle Fatigue Properties of Reduced Activation Ferritic/Martensitic Steels after High Dose Neutron Irradiation
FTP/3-4Rc Okubo, N.Reduced Activation Ferritic/Martensitic Steel F82H for in-Vessel Components - Improvement of Irradiation Response of Toughness and Ductility
FTP/3-5Ra Feng, K.M.Progress on Design and R&D of CN Solid Breeder TBM
FTP/3-5Rb Tanigawa, H.Mock-up Fabrication and Component Tests for Water Cooled Ceramic Breeder Test Blanket Module
FTP/3-6Ra Kugel, H.W.NSTX Lithium Technologies and Their Impact on Boundary Control, Core Plasma Performance, and Operations
FTP/3-6Rb Lyublinski, I.E.Development and Experimental Study of Lithium based Plasma Facing Elements for Fusion Reactor Application